Final Transmission Oil - Yamaha Majesty YP400V Owner's Manual

Hide thumbs Also See for Majesty YP400V:
Table of Contents

Advertisement

PERIODIC MAINTENANCE AND MINOR REPAIR
2. Hold the "OIL CHANGE" button
pushed for two to eight seconds.
1
2
3
4
1. "OIL CHANGE" button
3. Release the "OIL CHANGE" but-
5
ton, and the oil change indicator
will go off.
6
NOTE:
If the engine oil is changed before the
7
oil change indicator comes on (i.e. be-
fore the periodic oil change interval has
8
been reached), the indicator must be
reset after the oil change for the next
periodic oil change to be indicated at
9
the correct time. To reset the oil change
indicator before the periodic oil change
interval has been reached, follow the
above procedure, but note that the indi-
cator will come on for 1.4 seconds after
releasing the "OIL CHANGE" button,
otherwise repeat the procedure.
1
6-17

Final transmission oil

The final transmission case must be
checked for oil leakage before each
ride. If any leakage is found, have a
Yamaha dealer check and repair the
scooter. In addition, the final transmis-
sion oil must be changed as follows at
the intervals specified in the periodic
maintenance and lubrication chart.
1. Start the engine, warm it up by
riding the scooter for several min-
utes, and then stop the engine.
2. Place the scooter on the center-
stand.
3. Place an oil pan under the final
transmission case to collect the
used oil.
4. Remove the oil filler cap and drain
bolt to drain the oil from the final
transmission case.
EAU20060

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents