Table of Contents
Advertisement
1
1. Start-in-gear protection cable
3.
Remove the starter/flywheel cover after
removing the bolt(s).
4.
Prepare the engine for starting. For fur-
ther information, see page 26. Be sure
the engine is in neutral and that the en-
gine stop switch lanyard lock plate is at-
tached to the engine stop switch. The
main switch must be "
equipped.
ZMU03740
5.
If equipped the choke knob, pull out it
when the engine is cold. After the engine
starts, gradually return the choke knob
ZMU03741
to its home position as the engine warms
up.
" (on), if
6.
Insert the knotted end of the emergency
starter rope into the notch in the flywheel
rotor and wind the rope several turns
around the flywheel clockwise.
7.
Give a strong pull straight out to crank
ZMU03742
Trouble Recovery
OFF
ON START
ZMU02334
ZMU01906
ZMU04119
64
Advertisement
Table of Contents
