Procedure For Tilting Down (Manual Tilt Models); Cruising In Shallow Water; Cruising In Shallow Water (Manual Tilt Models) - Yamaha 25 Owner's Manual

Operation
3. Place the tilt lock lever in the release po-
sition.
4. Hold the rear of the top cowling with one
hand, tilt the engine up, and turn the tilt
support lever to the lock position and
support the engine.
EMU28022
Procedure for tilting down (manual
tilt models)
1. Place the tilt lock lever in the release/
down position or return the shallow wa-
ter lever to its original position.
39
ZMU03725
2. Slightly tilt the engine up until the tilt sup-
ZMU03726
port bar is automatically released.
3. Slowly tilt the engine down.
EMU28060

Cruising in shallow water

The outboard motor can be tilted up partially
to allow operation in shallow water.
EMU28071
Cruising in shallow water (manual tilt
models)
EWM00710
WARNING
Place the gear shift in neutral before us-
G
ing the shallow water cruising system.
Run the boat at the lowest possible
G
speed when using the shallow water
cruising system. The tilt lock mecha-
nism does not work while the shallow
water cruising system is being used.
Hitting an underwater obstacle could
cause the outboard motor to lift out of
ZMU03747
ZMU03731