Cruising In Other Conditions - Yamaha 25 Owner's Manual

Operation
4. Slightly tilt the outboard motor up. The
tilt support bar will lock automatically,
supporting the outboard motor in a par-
tially raised position.
NOTE:
This outboard motor has 2 positions for shal-
low water cruising.
5. To return the outboard motor to the nor-
mal running position, place the tilt lock
lever and shallow water lever to the lock
position.
41
ZMU03728
6. Slightly tilt the outboard motor up until
the tilt support bar automatically returns
to the free position.
7. Slowly lower the outboard motor to the
normal position.
EMU28192

Cruising in other conditions

Cruising in salt water
After operating in salt water, flush the cooling
water passages with fresh water to prevent
them from becoming clogged with salt de-
posits.
NOTE:
For cooling system flushing instructions, see
page 43.
Cruising in turbid water
Yamaha strongly recommends that you use
the optional chromium-plated water pump kit
(not available for some models) if you use
the outboard motor in turbid or muddy water
ZMU03729
conditions.
ZMU03731