Procedure For Tilting Down (Manual Tilt Models) - Yamaha F25G Owner's Manual

(3) Push the tilt support knob into the clamp
bracket to
WARNING! After tilting the outboard
motor, be sure to support it with the
tilt support knob or tilt support lever.
Otherwise the outboard motor could
fall back down suddenly if oil in the
power trim and tilt unit or in the pow-
er tilt unit loses pressure.
NOTICE: Do not use the tilt support
lever or knob when trailering the
boat. The outboard motor could
shake loose from the tilt support and
fall. If the motor cannot be trailered in
the normal running position, use an
additional support device to secure it
in the tilt position. For more detailed
information, see page 66.
UP
DN
ZMU08770
support the engine.
[EWM00263]
[ECM01642]
UP
EMU30193
Procedure for tilting down (manual
tilt models)
(1) Place the tilt lock lever in the lock posi-
tion.
(2) Slightly tilt the engine up until the tilt sup-
port bar is automatically released.
(3) Slowly tilt the engine down.
Operation
ZMU08771
ZMU08809
ZMU08772
61