Connect The Phone Cord; Load Paper - Epson WORKFORCE 525 User Manual

4
Remove only the yellow tape from each cartridge.
C aution: Don't remove any other seals or the cartridges may
leak.
5
Insert the cartridges in the holder for each color.
6
Press each cartridge down until it clicks.
7
Close the cartridge cover. Press down until it clicks.
8
Lower the scanner.
9
P ress the OK button to charge the ink.
Priming takes about 2½ minutes.
N ote: Your printer ships with full cartridges and part of the ink
from the first cartridges is used for priming the printer.
C aution: Don't turn off the printer while it is priming or you'll
waste ink.
5
Load paper
1
O pen the paper support and pull up the extensions.
2
P ull out the output tray extensions and raise the stopper.
3
Squeeze the edge guide as you slide it all the way to the
left.
Tip: If the clear plastic feeder guard is in the way, flip it forward.
4
L oad letter- or A4-size paper against the right edge and
behind the tab, with the printable side face up.
5
S lide the edge guide over.
6
Connect the phone cord
To fax, connect the included phone cord to a telephone wall
jack and to the LINE port on your product. To connect a
telephone or answering machine, see the Quick Guide.
Note: If you're connecting to a DSL phone line, you must use a DSL
filter or you won't be able to fax. Contact your DSL provider for the
necessary filter. See your online User's Guide for ISDN wall jack and
router connections.