Connect The Phone Cord; Choose Your Connection; Usb Connection - Epson WorkForce 600 Series Start Here Manual

6

Connect the phone cord

To use the WorkForce 600 Series for faxing, connect the included phone cord
from a telephone wall jack to the LINE port on the WorkForce 600 Series. To
connect a telephone or answering machine, see the Quick Guide for instructions.
Note:
If you're connecting to a DSL phone line, you must use a DSL filter or you won't
be able to fax. Contact your DSL provider for the necessary filter.
7

Choose your connection

Network (wireless or wired)
See your Network Installation
You can't install your software as
described below.
OR

USB connection

Make sure you have a USB cable (not included).
Then follow the steps below.
USB connection
Follow these steps to connect the WorkForce 600 Series directly to your
computer using a USB cable (not included).
Windows
1
Make sure the WorkForce 600 Series is
NOT CONNECTED to your computer.
Note:
If you see a Found New Hardware
screen, click
USB cable. You can't install your software
that way.
2
Insert the WorkForce 600 Series software CD.
With Windows Vista
window, click Run Epsetup.exe. When you see the
User Account Control screen, click Continue.
3
Click Install and follow the on-screen instructions.
Guide.
Cancel
and disconnect the
, if you see the AutoPlay
®