Table of Contents
Advertisement
DC21X4_ERRMSG_TXM_JABBER_TIMEOUT
0x07
Table 8 DC21X4 NT driver error codes
Driver initialization errors:
NDIS_ERROR_CODE_UNSUPPORTED_CONFIGURATION
DC21X4_ERRMSG_REGISTRY
The AdapterType Registry's key is missing or its value is unsupported by the
adapter board
NDIS_ERROR_CODE_ADAPTER_NOT_FOUND
No board matching the AdapterCFID Registry's key value was found plugged into
the PCI bus or in the slot specified in the Registry
NDIS_ERROR_CODE_OUT_OF_RESOURCES
DC21X4_ERRMSG_ALLOC_MEMORY
Not enough memory to allocate space for the Adapter data block
NDIS_ERROR_CODE_INVALID_VALUE_FROM_ADAPTER
DC21X4_ERRMSG_SROM
Invalid data read from the adapter's serial ROM
NDIS_ERROR_CODE_NETWORK_ADDRESS
No readable burnt_in or software configured station address
NDIS_ERROR_CODE_UNSUPPORTED_CONFIGURATION
DC21X4_ERRMSG_MEDIA
The selected media port is not supported by the board.
NDIS_ERROR_CODE_INTERRUPT_CONNECT
Interrupt initialization failed
NDIS_ERROR_CODE_TIMEOUT DC21X4_ERRMSG_LOAD_CAM
DC21X4 CAM initialization failed
Driver run time errors:
33
Advertisement
Table of Contents
Need help?
Do you have a question about the ITIpci 5232E and is the answer not in the manual?