Send Data To Remote - Advantech Modem ADAM-4550 User Manual

Example Command : $0AL(cr)
Response : !0A(cr)
command : 0A 80
.....................
bytes followed by data 12h 34h

4.12. Send Data to Remote

Description Send the DATA to RS-485 de-
vice through the remote module
at address AA
This command only works in
Data Pass mode. The user can
use the "Set Data Gate" com-
mand to open the data gate of
the module at AA so that you
28
Syntax
12 34 56
length 2688
Example
can send the data to module AA
without {AA.
{AA(Data string)(cr)
{ — one of the eight optional de-
limiters which is configured into
the module
Command :
{0C123456abcdABCD(cr)
The command sends data
'123456abcdABCD(cr)' through
the local ADAM4550 and the re-
mote ADAM-4550 module at ad-
dress 0Ch to a connected RS-
485 device.
ADAM-4550 User's Manual