Data Logger - Advantech WISE-2410X-E21 User Manual

4.2.4

Data Logger

Configure or query logs stored in module.
1. Data Configuration
◼
Log Conditions Default setting is to record the Velocity RMS alarm message if
user has set a threshold on Velocity RMS values.
–
By Period: Enable means the log function will run by period which includes
the Velocity RMS alarm message.
◼
General
–
Clear Log when Power Up: Enable or Disable to reset the Built-in log when
the system powers on.
–
Circular Log when Memory Full: Enable or Disable the Circular Operation for
Built-in Memory.
◼
Log Data: User can choose the log by channel or by sensor
–
By Channel: 0 means X-axis. 1 means Y-axis, 2 means Z-axis, 3 means Tem-
perature.
–
By Sensor: Data from sensors, including vibration features, alarm trigger,
sensor status and raw data.
Logger Configuration: Enable or Disable the I/O log function. Default setting on I/O
Log is disable, on System Log is enable.
33 WISE-2410X User Manual