Fujitsu ScanSnap iX500 Getting Started Manual page 8

3.
Double-click the [ScanSnap] icon.
Follow the instructions on the screen to continue with
the installation.
When you proceed with the operation, the [ScanSnap
- Connecting the ScanSnap] window appears.
4.
Follow the instructions on the screen to connect
the ScanSnap to the computer.
Click the [Next] button, and follow the instructions on
the screen to connect the ScanSnap to the
computer.
For details, refer to
(page 9).
When the connection check is complete, the
[ScanSnap Wireless Network Setup] window
appears.
Check the ScanSnap operation before connecting the
ScanSnap to a wireless LAN.
5.
Check the operation of the ScanSnap.
For details, refer to
6.
Select whether you want to configure the
wireless settings for connecting the ScanSnap to
a wireless LAN.
To configure the wireless settings, click the [Setup
Now] button, and then follow the instructions on the
screen. For details, refer to
ScanSnap to a Wireless LAN" (page 12)
Otherwise, click the [Later] button.
HINT
If you want to configure the wireless settings for connecting the ScanSnap to a wireless LAN at another
time, refer to the Operator' s Guide.
7.
Remove the Setup DVD-ROM from the DVD-ROM drive.
"Connecting the ScanSnap"
"Scan Test (USB Connection)" (page
"Connecting the
11).
.
8
.