Door Rails; Door Accessories - KitchenAid 2200139A Use And Care Manual

Door Rails

The door rails may be removed for easier cleaning.
Snap-on Door Rails
To remove the rails:
1. Remove all items from the shelf.
2. Push in slightly on the front of the bracket while pulling
out on the inside tab.
3. Repeat these steps for the other end of the rail.
To replace the rails:
1. Line up the ends of the brackets with the buttons on
the sides of the door liner.
2. Firmly snap bracket and rail assembly onto the tabs
above the shelf as shown.
Drop-in Door Rails
To remove the rails:
1. Remove all items from the shelf.
2. Pull straight up on each end of the rail.
To replace the rails:
1. Slide the shelf rail into the slots on the door.
2. Push the rail straight down until it stops.

Door Accessories

Door Bins
The door bins are removable for easy cleaning and
adjusting.
1. To remove the bin, simply lift the bin up and pull
straight out.
2. To replace the bin, slide it in above the desired
support button and push down until it stops.
Can Rack
To remove the rack:
1. Remove all items from the rack.
2. Lift the rack up.
3. Pull the rack straight out.
To replace the rack:
1. Hold the back of the rack above the desired guide.
2. Push the back of the rack back and down until it stops.
21