Table of Contents
Advertisement
OPERATING YOUR SET-TOP
Turning your set-top on and off
After you have connected your set-top to the wall AC outlet (and switched this outlet ON, if it has a switch), the
light next to the power button on your set-top's front panel should be red.
Wait for a few seconds, then press the power button on the front panel of your set-top to turn it on. The light next
to the power button goes green, to show that your set-top is on.
If the light next to the power button is neither red nor green, there is a problem (see page 37).
To turn your set-top on or off at any time, press the power button on its front panel or the POWER button on
your remote control (first making sure your remote control is set to control your set-top).
Never turn off your set-top by simply disconnecting it from the power supply. If you need to disconnect your set-
top, first stop any recording. Then turn off your set-top by pressing the power button on its front panel or on your
remote control, so that the light next to the power button goes red. Then wait 60 seconds before disconnecting
your set-top from the wall AC outlet.
Power Saving: To save power and money, and to reduce greenhouse gas emissions, turn off your
set-top, using the power button, when it is not in use.
IMPORTANT: Unless there is a lightning storm or you will be away from your home for a long time, do not
unplug your set-top from the wall AC outlet (or do not switch it off there, if the outlet has a switch). Your set-
top cannot be updated with new features, through the cable, if it is disconnected from the AC power supply.
Depending on your set-top's settings, if you switch your set-top off, any TV that is attached to your set-top's
POWER OUTLET may also turn off. For more details, see page 36.
TDC770D
NOTES
To turn your set-top on,
press the power button.
The light next to the button
changes from red to green.
IR RECEIVE
MESSAGE
HDTV
BYPASS
Front panel display, showing
the time (see page 36)
15
Hide quick links:
Advertisement
Table of Contents
