Pace TDC770D Operator's Manual page 40

SOLVING PROBLEMS (cont.)
Check
Can you see a picture on
your TV screen?
YES
D
See the next page
38
Suggested solution
Your TV and other equipment may not be
turned on. Check that they are plugged into AC
R
NO
power outlets and turned on.
Note: If you have connected your TV to the
POWER OUTLET (AC outlet) on your set-top,
when you turn off your set-top, your TV may
turn off automatically, if the "AC Outlet" is set
to "Switched" (see page 36). You may wish to
keep this feature, or you may wish to set "AC
Outlet" to "Unswitched".
Further checks, if there is still a problem
Check that you have selected the appropriate AV input
on your TV: HDMI, component video (YPbPr), S-video,
or composite video (depending on how your system is
connected up).
If you are using a component video (YPbPr) connection,
make sure the set-top's TV Display Capability settings are
appropriate for your TV (see pages 25 through 27).
If you are using the HDMI connection, make sure the
connection goes directly from your set-top to your TV. If
your set-top detects that the link is not secure, your set-top
will not transmit a picture (see page 11). If you expect the
link to be secure, try disconnecting and reconnecting the
HDMI cable.