Table of Contents
Advertisement
MAKING USER SETTINGS (cont.)
3. If you want to change the setting, press U or D. Press the select button to confirm the choice and change to
the new setting.
4. Press the L button. The front panel shows "PiLL" again and the PACE USER SETTINGS menu reappears.
To continue making the settings, see the next section.
16:9 picture in a 4:3 transmission
Sometimes, 4:3 transmissions may contain a 16:9 picture, with black borders at the top and bottom. On a
16:9 TV, this may display with black borders all the way around the picture. To remove these borders, you can
use the "Zoom function" button on your remote control (could be labeled ZOOM or ASPECT).
See the example below. For more information about using "Zoom", see page 21.
4:3 transmission
16:9 TV with no automatic
detection of 4:3,
Auto-pillarbox switched off
NOTE
16:9 TV with no automatic
Use 'Zoom' to increase the picture size.
(Note: the picture may lose some
detection of 4:3,
definition due to the expansion.)
Auto-pillarbox switched on
29
Hide quick links:
Advertisement
Table of Contents
