Table of Contents
Advertisement
8
Configuring CDP
115
•
LLDP Optional TLVs
Size (Bytes)
-
Status
-
—If the LLDP MED optional TLVs packets were sent, or if they were
overloaded.
•
LLDP MED Inventory
Size (Bytes)
-
Status
-
—If the LLDP MED inventory packets were sent, or if they were
overloaded.
•
Total (Bytes)—Total number of bytes of LLDP information in each packet
•
Left to Send (Bytes)—Total number of available bytes left for additional
LLDP information in each packet.
This section describes how to configure CDP.
It covers the following topics:
•
Setting CDP Properties
•
Editing CDP Interface Settings
•
Displaying CDP Local Information
•
Displaying CDP Neighbors Information
•
Viewing CDP Statistics
Setting CDP Properties
Similar to LLDP, CDP (Cisco Discovery Protocol) is a link layer protocol for directly
connected neighbors to advertise themselves and their capabilities to each other.
Unlike LLDP, CDP is a Cisco proprietary protocol.
—Total LLDP MED optional TLVs packets byte size.
—Total LLDP MED inventory TLVs packets byte size.
Cisco Small Business 300 Series Managed Switch Administration Guide
Administration: Discovery
Configuring CDP
Advertisement
Table of Contents
