Table of Contents
Advertisement
12
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
197
This MAC address cannot be assigned to any other VLAN group.
NOTE
•
Prefix Mask—Enter one of the following:
-
Host—Source host of the MAC address
-
Length—Prefix of the MAC address
•
Group ID—Enter a user-created VLAN group ID number.
Click Apply. The MAC address is assigned to a VLAN group.
Mapping VLAN Group to VLAN Per Interface
Ports/LAGs must be in General mode.
To assign a MAC-based VLAN group to a VLAN on an interface:
Click VLAN Management > VLAN Groups > MAC-Based Groups to VLAN.
Click Add.
Enter the values for the following fields:
•
Group Type—Displays that the group is MAC-Based.
•
Interface—Enter a general interface (port/LAG) through which traffic is
received.
•
Group ID—Select a VLAN group, defined in the MAC-Based Groups page
•
VLAN ID—Select the VLAN to which traffic from the VLAN group is
forwarded.
Click Apply to set the mapping of the VLAN group to the VLAN. This mapping
does not bind the interface dynamically to the VLAN; the interface must be
manually added to the VLAN.)
Cisco Small Business 300 Series Managed Switch Administration Guide
VLAN Management
VLAN Groups
.
Advertisement
Table of Contents
