Cisco Small Business 300 Administration Manual page 133

Administration: Discovery
Configuring CDP
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
Cisco Small Business 300 Series Managed Switch Administration Guide
CDP Configuration Workflow
The followings is sample workflow in configuring CDP on the device. You can also
find additional CDP configuration guidelines in the LLDP/CDP section.
Enter the CDP global parameters using the CDP Properties page
Configure CDP per interface using the Interface Setting page
If Auto Smartport is to detect the capabilities of CDP devices, enable CDP in the
Smartport Properties page.
See Identifying Smartport Type
devices for the Smartport feature.
To enter CDP general parameters:
Click Administration > Discovery - CDP > Properties.
Enter the parameters.
• CDP Status—Select to enable CDP on the device.
• CDP Frames Handling—If CDP is not enabled, select the action to be taken
if a packet that matches the selected criteria is received:
Bridging
- —Forward the packet based on the VLAN.
Filtering
- —Delete the packet.
Flooding
- —VLAN unaware flooding that forwards incoming CDP packets
to all the ports excluding the ingress ports.
• CDP Voice VLAN Advertisement—Select to enable the device to advertise
the voice VLAN in CDP on all of the ports that are CDP enabled, and are
member of the voice VLAN. The voice VLAN is configured in the Voice VLAN
Properties page.
• CDP Mandatory TLVs Validation—If selected, incoming CDP packets not
containing the mandatory TLVs are discarded and the invalid error counter is
incremented.
• CDP Version—Select the version of CDP to use.
for a description of how CDP is used to identify
8
116