3. Side Burner & Side Shelf Assembly
(a) Loosen (2) preinstalled 1/4 x 10mm Phillips head
screws from right side of grill head (A) as shown. Do
not screw out fully; leave ¼ extended for shelf
assembly. (Fig. 9)
(b) Through side burner shelf keyholes, hang side
burner shelf (N) on two loosened screws. (Fig. 10)
(c) Using (2) 1/4 x 10mm Phillips head screws (BB) and
(2) 1/4 flat washers (EE), attach side burner shelf (N) to
grill head from inside the firebox. Insert (1) 5/32 x 8
mm Phillips head screws (CC) and (1) 5/32 lock
washers (GG) to attach the side burner shelf front panel
to the control panel (Fig 11).Fully tighten the two
loosened screws to secure shelf to firebox.
(d) Repeat steps (a) through (c) to install side shelf.