TYAN Toledo i965R (S5180AG2N) Manual page 47

3.06 – Power Management Setup
Options related to power management can be altered through the following:
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
ACPI Function
Run VGABIOS if S3 Resume
Power Management
Video Off Method
Video Off In Suspend
Suspend Type
MODEM Use IRQ
Suspend Mode
HDD Power Down
Soft-Off by PWR-BTTN
Intruder Support
PWRON After PWR-Fail
Wake-Up by PCI card
Power On by Ring
USB KB Wake-Up From S3
Resume by Alarm
X Date (of month) Alarm
X Time (hh:mm:ss) Alarm
＊＊Reload Global Timer Events ＊＊
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
FDD,COM, LPT Port
PCI PIRQ (A-D)#
↑↓←→: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
ACPI Function:
Toggles advanced power and configuration done by OS.
Enabled / Disabled
Run VGABOIS if S3 Resume:
Defines the type used to run VGABOIS if S3 Resume.
Auto / Yes / No
Power Management:
This function allows you to set the default parameters of power-saving modes. Set this to User
Define to choose your own parameters. The following table shows the parameters for Maximum
Saving and Minimum Saving options for the various modes:
Mode Doze
Min Saving 1 hour
Max Saving 1 min
[Enabled]
[Auto]
[User Define]
[DPMS]
[Yes]
[Stop Grant]
[3]
[Disabled]
[Disabled]
[Instant-Off]
[Disabled]
[Former Sts]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
0
0 : 0 : 0
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Standby Suspend
1 hour 1 hour
1 min 1 min
47
http://www.tyan.com
Item Help
___________________
______
Menu Level ►
HDD Power Down
15 min
1 min