Table of Contents
Advertisement
APIC Mode:
This option allows you to enabled or disabled Advanced Programmable Interrupt Controller
(APIC) Mode.
Enabled / Disabled
MPS Version Control For OS:
When two CPUs are onboard (not a feature of this board) this feature allows you to select
Multi-Processor Spec. (MPS) version control for OS when the logo test executes.
1.1 / 1.4
OS Select For DRAM>64MB:
This BIOS feature determines how systems with more than 64MB of memory are managed. A
wrong setting can cause problems like erroneous memory detection.
If you are using an older version of the IBM OS/2 operating system, you should select OS/2.
If you are using the IBM OS/2 Warp v3.0 or higher operating system, you should select Non-
OS/2.
If you are using an older version of the IBM OS/2 operating system but have already installed
all the relevant IBM Fix-Paks, you should select Non-OS/2.
Users of non-OS/2 operating systems (like Microsoft Windows 2003) should select the Non-
OS2 option.
Non-OS2 / OS2
Console Redirection:
This option will redirect the BIOS and POST screens to the serial port to allow remote
management using a terminal server.
Report No FDD For WIN 95:
Set this option to Yes if you are using Windows 95/98 without a floppy to release IRQ6 (this is
required to pass Windows 95/98's SCT test and get the logo).
No / Yes
Small Logo (EPA) Show:
Toggle the display of the EPA Energy Star logo at POST.
Enabled / Disabled
37
http://www.tyan.com
Advertisement
Table of Contents
