Table of Contents
Advertisement
Super IO Device
Phoenix – AwardBIOS CMOS Setup Utility
Super IO Device
Wake UP FROM S3
Onboard FDC Controller
Onboard Serial Port 1
↑↓←→: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Press Power Button key to resume from S3 state.
Wake UP FROM S3:
This option defines how the system can be woken from sleep mode.
Button only / Keyboard +BTN / KB +Mouse +BTN / Mouse +BTN
Onboard FDC Controller:
Select Enabled if your system has a floppy disk controller (FDC) installed on the system board
and you wish to use it. If you install and-in FDC or the system has no floppy drive, select
"Disabled" in the field.
Enabled / Disabled
Onboard Serial Port 1:
Select an address and corresponding interrupt for the first and second serial ports.
3F8/IRQ4 / 2E8/IRQ3 / 3E8/IRQ4 / 2F8/IRQ3 / Disabled / Auto
[BUTTON ONLY]
[Enabled]
[3F8 / IRQ4]
46
http://www.tyan.com
Item Help
_________________________
Menu Level ►►
Advertisement
Table of Contents
