Running The Department Confirmation Report; Running The Plu Confirmation Report; Running The Clerk Confirmation Report - Royal TS4240 User Manual

Running the Department Confirmation Report

You can print a report that shows the active information for all
programmed departments.
To run a department confirmation report
401 -- Department Set Up Print All Programmed Dept
1 Put the MGR key in the Mode key slot and turn it to the PROG position.
2 Press the Arrow Down key to select 401 -- Department Set up. Press
3 Press the Arrow Down key to select Print All Programmed Dept. Press

Running the PLU Confirmation Report

The PLU Confirmation Report allows you to check all PLUs programmed.
For more information about programming PLUs, see Programming PLU
Descriptions on page 38.
To run the PLU confirmation report
402 -- PLU Setting Print PLU Parameters
1 Put the MGR key in the Mode key slot and turn it to the PROG position.
2 Press the Arrow Down key to select 402 -- PLU Setting. Press Enter.
3 Press the Arrow Down key to select Print PLU Parameters. Press Enter.

Running the Clerk Confirmation Report

You can print a list of all clerks that shows their name and passcodes.
To print a clerk report
403 -- Clerk Setting Print Programmed Clerks
1 Put the MGR key in the Mode key slot and turn it to the PROG position.
2 Press the Arrow Down key to select 403 -- Clerk Setting. Press Enter.
3 Press the Arrow Down key to select Print Programmed Clerks. Press
TS4240 User's Guide
If prompted, enter the Manager passcode and press Enter.
Enter.
Enter.
If prompted, enter the Manager passcode and press Enter.
If prompted, enter the Manager passcode and press Enter.
Enter.
Running the Department Confirmation Report
82