Remote Menu - Sony LMD-1751W Operating Instructions Manual

Submenu Setting
POSITION Sets the position of the time code
display.
You can select between 1 and 2.
• 1: Bottom
• 2: Top

REMOTE menu

REMOTE
PA R A L L E L R E M O T E :
S E R I A L R E M O T E :
M O N I T O R :
C O N T R O L L E R :
C O N N E C T I O N :
32
Adjustment Using the Menus
xxxxxxx
xxx
Submenu Setting
PARALLEL REMOTE Selects the PARALLEL REMOTE
connector pins for which you want
to change the function.
You can assign various functions to
1 to 4 pins and 6 to 8 pins. The
following lists the functions you
can assign to the pins.
• – – – ("– – –": No function is
assigned.)
• COMPOSITE
• Y/C
• RGB
• COMPONENT
• DVI
• HD15
• OPTION A-1
• OPTION A-2
• OPTION B-1
• OPTION B-2
• OVERSCAN
• FULL
• NORMAL
• NATIVE
• 4:3
• 16:9
• TALLY R
• TALLY G
• EXT SYNC
• BLUE ONLY
• MONO
• H/V DELAY
• 16:9 MARKER
• 15:9 MARKER
• 14:9 MARKER
• 13:9 MARKER
• 1.85:1 MARKER
• 2.35:1 MARKER
• 1.85:1 & 4:3 MARKER
• 4:3 MARKER
• CENTER MARKER
• SAFE AREA 80%
• SAFE AREA 85%
• SAFE AREA 88%
• SAFE AREA 90%
• SAFE AREA 93%
• MARKER MAT HALF
• MARKER MAT BLACK
Notes
• If you use the PARALLEL
REMOTE function, you need to
connect cables. For more details,
see page 36.
• Set MARKER ENABLE
(page 27) to ON to control the
aspect marker, center marker or
safe area marker.