Connecting The Ac Power Cord; Installing The Input Adaptor - Sony LMD-1751W Operating Instructions Manual

Connecting the AC
Power Cord
1
Plug the AC power cord into the AC IN socket on
the rear panel. Then, attach the AC plug holder
(supplied) to the AC power cord.
AC plug holder (Supplied)
2
Slide the AC plug holder over the cord until it locks.
To disconnect the AC power cord
Pull out the AC plug holder while pressing the lock
levers.
16
Connecting the AC Power Cord / Installing the Input Adaptor
AC IN socket
AC power cord
Installing the Input
Adaptor
Before installing the input adaptor, disconnect the power
cord.
1
Remove the panel of the optional input slot.
2
Insert the input adaptor into the slot.
PA RA LL
EL RE MO
TE
SE RI AL
RE MO TE
3
Tighten the screws.