Sony LMD-1541W Operating Instructions Manual page 28

Submenu
TRANSPARENCY
IMD (in-monitor display) SETTING
The monitor supports "TSL UMD Protocol - V5.00"
provided by Television System LTD.
Tally 1 and tally 2 lamp colors, text colors and text
display brightness can be set in the setting menu.
C A M E R A 1
Tally 1
Notes
• Set values to "0x0000" in SCREEN and INDEX of
TSL protocol setting before displaying IMD.
• The monitor displays English alphabet, numbers,
symbolic codes and Japanese letters (i.e. Hiragana and
Katakana). Certain symbols cannot be displayed.
• Up to 16 characters are displayed in English and
Japanese. A voiced sound mark in Japanese is counted
as one character.
USER CONFIG – IMD SETTING
I M D :
P O S I T I O N :
T R A N S PA R E N C Y:
T E X T C O L O R :
T E X T B R I G H T N E S S :
TA L LY 1 :
TA L LY 2 :
Submenu
IMD
POSITION
28
Adjustment Using the Menus
Setting
Selects BLACK or HALF
(transparent) for the background of
T/C display.
• BLACK: The background
becomes black. Displayed
image is hidden behind the
background.
• HALF: The background becomes
transparent. Displayed
image appears under the T/C
display.
Text Tally 2
xx
x
xxxx
x
x
x
x
Setting
Selects ON to activate IMD and
OFF to turn it off.
Sets the position of IMD. You can
select between 1 and 2.
• 1: Top
• 2: Bottom
Submenu Setting
TRANSPARENCY Selects BLACK or HALF for the
background of IMD.
• BLACK: The background is
• HALF: The background is
TEXT COLOR Selects the color of text displayed
in IMD. Selecting "0 (commanded
color)" sets the same color as set in
TSL command. Selecting from 1
and 8 sets the following colors,
regardless of the command setting.
• 0: Commanded color
• 1: White
• 2: Red
• 3: Green
• 4: Blue
• 5: Yellow
• 6: Cyan
• 7: Magenta
• 8: Amber
TEXT BRIGHTNESS Selects brightness of text displayed
in IMD. Selecting "0 (commanded
brightness)" sets the brightness
same as set in TSL command.
Selecting from between 1 and 3 sets
the following brightness, regardless
of the command setting.
• 0: Commanded brightness
• 1: 100%
• 2: 50%
• 3: 14%
TALLY 1 Selects the color of tally 1 lamp
displayed in IMD. Selecting "0
(commanded color)" sets the same
color as set in TSL command.
Selecting from 1 and 8 sets the
following colors, regardless of the
command setting.
• 0: Commanded color
• 1: White
• 2: Red
• 3: Green
• 4: Blue
• 5: Yellow
• 6: Cyan
• 7: Magenta
• 8: Amber
black. Displayed image is
hidden behind the
background.
transparent. Displayed
image can be seen
indistinctly behind the IMD
display.