Connecting The Ac Power Cord; Selecting The Default Settings - Sony LMD-1541W Operating Instructions Manual

Connecting the AC
Power Cord
1
Plug the AC power cord into the AC IN socket on
the rear panel. Then, attach the AC plug holder
(supplied) to the AC power cord.
AC power cord
2
Slide the AC plug holder over the cord until it
locks.
To disconnect the AC power cord
Pull out the AC plug holder while pressing the lock
levers.
18
Connecting the AC Power Cord / Selecting the Default Settings
AC IN socket
AC plug holder
(supplied)
Selecting the Default
Settings
When you turn on the unit for the first time after
purchasing it, select the area where you intend to use this
unit from among the options.
The default setting values for each area
5
4
3
3
1 NORTH AMERICA
ARGENTINA
2 LATIN AMERICA
PARAGUAY
PAL&PAL-N
AREA
URUGUAY
NTSC&PAL-M
OTHER AREA
AREA
3 AFRICA AUSTRALASIA
EUROPE MIDDLE-EAST
NTSC AREA
4 ASIA EXCEPT
JAPAN
PAL AREA
5 JAPAN
3
1
2
COLOR NTSC COLOR
TEMP SETUP SPACE
D65 7.5 ITU-709
D65 0 ITU-709
D65 0 ITU-709
D65 0 ITU-709
D65 7.5 ITU-709
D65 0 ITU-709
D65 7.5 ITU-709
D65 0 ITU-709
D93 0 ITU-709