User Config Menu - Sony LMD-1541W Operating Instructions Manual

USER CONFIG menu

The USER CONFIG menu is used for setting the
system, marker, T/C display, IMD, WFM/ALM/
VECTOR, focus, function button, closed caption, and
audio.
USER CONFIG
S Y S T E M S E T T I N G :
M A R K E R S E T T I N G :
T / C D I S P L AY S E T T I N G :
I M D S E T T I N G :
W F M / A L M / V E C T O R S E T T I N G :
F O C U S S E T T I N G :
F U N C T I O N B U T T O N S E T T I N G :
C L O S E D C A P T I O N S E T T I N G :
AU D I O S E T T I N G :
SYSTEM SETTING
Submenu
NTSC SETUP
FORMAT DISPLAY
LANGUAGE
POWER SAVING
26
Adjustment Using the Menus
Setting
Selects the NTSC setup level from
two modes.
The 7.5 setup level is used mainly
in North America. The 0 setup level
is used mainly in Japan.
Selects the display mode of the
signal format and scan mode.
• ON: The format and scan mode
are always displayed.
• OFF: The display is hidden.
• AUTO: The format and scan
mode are displayed for
about five seconds when the
input of the signal starts.
Selects the menu or message
language from among seven
languages.
• ENGLISH: English
• FRANÇAIS: French
• DEUTSCH: German
• ESPAÑOL: Spanish
• ITALIANO: Italian
• : Japanese
• : Chinese
Sets the power saving mode on or
off. When you set to ON, the
monitor goes into power saving
mode if no signal is input for about
one minute.
Submenu Setting
I/P MODE (picture delay Selects to set the delay by the
minimum) picture processing to the minimum
level when the interlace signal is
input.
• INTER-FIELD
• FIELD MERGE: The
• LINE DOUBLER: The
• INTRA-FIELD: INTRA-FIELD
*
When DISPLAY in WFM/ALM/
VECTOR SETTING is activated,
INTER-FIELD cannot be
selected.
LED BRIGHTNESS Selects the brightness of the LED of
the buttons.
• HIGH: The LED becomes
• LOW: The LED becomes darker.
RGB RANGE Sets the black level and white level
for the RGB format of HDMI input.
• FULL: 0 (black level) to 255
• LIMITED: 16 (black level) to
DVI Selects a format for DVI input
signal.
• PC: For RGB signal format
• VIDEO: For YP
*
: Mode for
giving precedence to the
picture quality. Performs
interpolation depending on
the movement of the images
between the fields. It takes
longer than the other setting
modes to process the
picture.
processing time is shorter.
Combines the lines in the
odd fields and even fields
alternately regardless of the
movement of images.
Suitable for viewing still
images.
processing time is shorter.
Performs interpolation by
repeating each line in the
data receiving sequence
regardless of the field. As
the line flicker is displayed
in this mode, it is available
for checking the line flicker
of the telop work and so on.
is only available for 1920 ×
1080 SDI signal input.
Mode to provide naturally
reproduced image and quick
picture processing. Performs
interpolation within the
fields. Suitable for 1920 ×
1080 SDI signal input.
brighter.
(white level)
235 (white level)
P signal
B R
format