Attach Connecting Arm Pivots - Nautilus EV716 Assembly Manual

8-1 Use (1) M12 x 90mm Allen Head Bolt (Ref #25) and (1) M12 Locking Nut (Ref #21) to attach the Front
Connecting Arm Pivot (#24) and torque to 36 ft/lbs.
8-2 Use (1) M12 x 100mm Allen Head Bolt (Ref #19) and (1) M12 Locking Nut (REf #21) to attach the Rear
Connecting Arm Pivot (#26) and torque to 36 ft/lbs.
8-3 Repeat Step 6 and 7 for the Right Side Pod Assembly, Foot Plates and Connecting Arm Pivots.
BoLT #
kg/CM) BefoRe PRoCeeDINg To THe NexT STeP .
19 AND #25
MuST Be TIgHTeNeD To
ASSEMBLY PROCESS
Step 8: Attach Connecting Arm Pivots
36
fT/LBS (
Nautilus® Pro Series Elliptical Assembly Manual
500
15