Programming Thermostat; Programming Your Thermostat - Hunter Thermostat Owner's Manual

Programming Your Thermostat

Your thermostat can be programmed in two
different ways.
1. Auto-program method
2. Manual method
Before programming, position the
Heat/Off/Cool selector to the mode to be
programmed.
Auto-program method
In auto-program method, you can program
your thermostat instantly for the entire week
by simply pressing "Auto Prog." key once.
When this key is pressed, standard program
gets activated and your thermostat is
programmed automatically. The standard
program is shown in table 3.
If you wish to change this program to suit
your life style, you can do so by changing
the time and the temperatures of those
programs which you want to be different
than standard programs. The method is
explained in the manual method of
programming.
AUTO
Press Your thermostat will be
PROG
programmed automatically according to Table 3.
PROGRAM
NUMBER TIME
1 5:00AM
2 7:00AM
3 3:00PM
4 10:00PM 62 (16) 82 (27)
TABLE 3
(If the slide switch is in the heat mode, only
heat program is effective. In order to activate
cool program, slide the switch to cool mode
and press "Auto Prog.")
Manual method
In this method, each program is inserted accord-
ing to your personal programming schedule.
When the battery is first inserted, the
thermostat is programmed for 68°F (20°C) in
heat mode and 78°F (25°C) in cool mode.
NOTE: There are no energy saving time or
temperature settings.
Familiarize yourself with manual
programming. The following example
demonstrates the manual programming
method. You can program or change the
program of weekdays and weekends.
TEMP IN F° (C°)
HEAT COOL
68 (20) 78 (25)
60 (15) 85 (29)
68 (20) 78 (25)