Hunter 44917 Owner's Manual

Inside the Box
Internet Thermostat Gateway Gateway Wall Adapter
Gateway Ethernet Cable
(4) AA Batteries Wire Labels
Screwless Wire Terminals All-Purpose Screws Built-In Bubble Level
5-Minute Installation Kit
Setup
1. Install
Internet Thermostat
Refer to your
Internet
Thermostat
Installation Guide
Installation Guide
2. Connect
modem/router
When the gateway light turns green, your thermostat will automatically connect to the internet.
Tip: Lift gateway antenna to improve connectivity.
3. Register
OR
my.HunterFan.com
4. Control
Control from any
smart phone, tablet,
laptop or desktop
computer.
Product Features
Connectivity Status Battery Status Child Lock
Place the gateway Replace batteries Enable/disable by holding
near the thermostat to when this icon down the AWAY and FAN
improve connectivity. is blinking. buttons simultaneously.
Target Temperature Filter Status Current Temperature
Adjust your desired Replace the HVAC filter View the actual
temperature using the when this icon appears. temperature.
UP and DOWN arrows.
Functions
System Button Schedule Button
OFF turns off your HVAC system. ON runs schedules defined on your
COOL only turns on the AC. app and at my.HunterFan.com.
HEAT only turns on the furnace.
OFF runs your unit manually.
AUTO heats or cools based on your setpoints.
Fan Button Away Button
AUTO turns the fan on only conserves energy while you are
when heating or cooling. away from your home. Define away
ON turns the fan on to circulate setpoints on your thermostat, app,
air without heating or cooling. and at my.HunterFan.com.