Reviewing Programs - Hunter Thermostat Owner's Manual

Programming

Reviewing Programs

You may want to review the programs to see that the settings are compatible with your lifestyle.
Weekday
Program
PROG
Continue pressing
NOTE: The temperatures you have
entered will NOT take effect immediately,
but at the next program time change. The
Thermostat is pre-set to 68°F in heat
mode and 78°F in cool mode.
If you want a temperature other than 68°F
or 78°F right away, you must use the
manual override feature described below
to enter the temperature you want.
M T W TH F SA SU
9 : 1 5 7 2
8
AM
PM
SET TEMP HOLD
FILTER LO BAT
M T W TH F SA SU
86 : 00 68
AM
PM
SET TEMP HOLD TEMP
FILTER LO BAT
to review programs.
PROG
Normal display of current time,
HEAT COOL
c
temperature, and day of week.
TEMP
1st weekday program is displayed.
HEAT COOL
c
Program indicator (1) appears.
M to F indication appears.
When your entered program becomes
effective, the corresponding program
number will appear on the display.
After programming, confirm
the new programs by pressing
If you are armchair programming the
thermostat, before you mount the face of the
thermostat, turn the system selector to the
off position.
24-25
PROG