Displaying Socket Information - Brocade Communications Systems ServerIron ADX 12.4.00a Security Manual

Displaying socket information

The following socket information is available from the BP console within the rconsole mode.
•
•
•
To access the display command that present this information, you must enter the BP console using
the rconsole command as shown in
Displaying socket details in open status
Use the show socket id command in the rconsole mode to display socket detail in open status, as
shown in the following.
ServerIronADX1/1# show socket id 0
Sock
0000
Syntax: show socket id <HEX>
The <HEX> variable specifies the socket ID number in hexadecimal form of the socket that you
want to display details for.
Displaying all sockets in open status
Use the show socket list command in the rconsole mode to display all sockets in open status, as
shown in the following.
ServerIronADX# rconsole 1 1
ServerIronADX1/1# show sock lis
Sock
0000
0001
0002
Syntax: show sock list
ServerIron ADX Security Guide
53-1002440-03
Socket detail in open status
All sockets in open status
Socket state information
Peer Local
0.0.0.0: 0 10.10.1.100:
Peer
0.0.0.0:0 10.10.6.10:
0.10.6.50:3832 10.10.6.10:
209.157.22.1:80 10.10.6.50:3832 SYN_SENT 00000000
"Using Rconsole" on page 188.
State
443 LISTEN
Local State
443
443
Displaying socket information
rx_q_bytes tx_q_byptes
00000000 00000000
rx_q_bytes tx_q_byptes
LISTEN 00000000
ESTABLISHED 00000000
00000000
6
00000000
00000000
199