Displaying Ssl Information - Brocade Communications Systems ServerIron ADX 12.4.00a Security Manual

6
SSL debug and troubleshooting commands
soft-reset
Detailed information is logged on the BP console when these tests are run.

Displaying SSL information

The following SSL Statistics information is available from the BP console within the rconsole mode:
•
•
•
•
•
•
•
•
•
•
•
Using Rconsole
To access the display command that present this information, you must enter the BP console using
the rconsole command as shown.
ServerIronADX# rconsole 1 1
Syntax: rconsole <slot> <bp>
The <slot> variable specifies the number of the slot that the ASM is installed in whose BP console
you want to access.
The <bp> variable specifies the number of the barrel processor whose BP console you want to
access.
Displaying proxy debug counters
Use the show cp debug command in the rconsole mode to display connection proxy debug counters
as shown in the following.
ServerIronADX# rconsole 1 1
ServerIronADX1/1# show cp debug
CPU high water mark reached, SYN dropped [ 10]:
Syntax: show cp debug
188
Connection proxy debug counters
Connection proxy statistics
Authentication statistics
Locally stored SSL certificates
SSL connection information
CRL status record
SSl debug counters
Locally stored SSL keys
Information about specific SSL keys
Details of SSL profiles
Information about SSL record sizes
session alloc failed [ 36]:
server sock error or timeout [ 84]:
client sock error or timeout [ 85]:
Soft Reset Test
29991204
1607078
8
525
ServerIron ADX Security Guide
53-1002440-03