Table of Contents
Advertisement
Features and Benefits
Connectivity
• 24 100BASE-TX ports for 10 or 100 Mbps Ethernet connections. Auto-negotiation
enables each RJ-45 port to automatically select the optimum communication mode
(half or full duplex) if this feature is supported by the attached device; otherwise the
port can be configured manually.
• 2 1000BASE-T ports for easy Gigabit Ethernet integration and for protection of
your investment in legacy LAN equipment.
• RJ-45 ports support auto MDI/MDI-X pinout selection.
• Unshielded (UTP) cable supported on all RJ-45 ports: Category 3 or better for
10 Mbps connections, Category 5 or better for 100 Mbps connections, and
Category 5, 5e or 6 for 1000 Mbps connections.
• IEEE 802.3-2002 Ethernet, Fast Ethernet, and Gigabit Ethernet compliance
ensures compatibility with standards-based hubs, network cards and switches
from any vendor.
Expandability
• 2 Small Form Factor Pluggable (SFP) transceiver slots.
• Supports 100BASE-FX, 1000BASE-T, 1000BASE-SX, 1000BASE-LX, and
1000BASE-LH SFP-compatible transceivers.
Performance
• Transparent bridging
• Aggregate bandwidth of up to 12.8 Gbps
• Switching table with a total of 16K MAC address entries and 4K IP address entries
• Provides store-and-forward switching for intra-VLAN traffic, and IP routing for
inter-VLAN traffic
• Supports wire-speed switching at Layer 2, and wire-speed routing at Layer 3
• Supports flow control, using back pressure for half duplex and IEEE 802.3x for full
duplex
• Broadcast storm control
Management
• "At-a-glance" LEDs for easy troubleshooting
• Network management agent:
• Manages switch in-band or out-of-band
• Supports Telnet, SNMP/RMON and Web-based interface
Features and Benefits
1
1-5
Advertisement
Table of Contents
