Verify The Configuration; Dhcp Relay With Ipcp Negotiation Example; Cisco 765 Series Router Commands - Cisco 700 Series Configuration Manual

DHCP Relay with IPCP Negotiation Example

Verify the Configuration

You can use the show ip configuration all and show ip route all commands to see the IPCP
negotiation address.
DHCP Relay with IPCP Negotiation Example
This section describes how to configure a remote Cisco 700 series router for DHCP relay
with IPCP negotiation to a central-site router running Cisco IOS software.
Figure 5-2 is an illustration of the configuration used in this example.
Figure 5-2
DHCP
client

Cisco 765 Series Router Commands

Following are the commands for configuring the remote Cisco 765 series router for DHCP
Relay with IPCP Negotiation with a Cisco 4500 router:
set system 765
set dhcp relay 172.168.100.2
set user 4500
set 1 number phone_number
set 2 number phone_number
set ip routing on
set ip rip version 2
set ip rip receive v2
set ip rip update linkup
reboot
For detailed information regarding the commands listed here, refer to the Cisco 700 Series
Router Command Reference.
5-6 Cisco700 Series Router Configuration Guide
DHCP Relay with IPCP Negotiation
DHCP relay agent
ISDN network
Cisco 765
DHCP
server
Cisco 4500 172.168.100.2