Adjusting The Brightness And Contrast (Bright/Contrast) - IBM P97 Operating Instructions Manual

OPTION (page 12)
Adjusts the monitor's
options.
The options include:
• locking the controls
• changing the on-screen
menu's language
• changing the on-screen
menu position
0 RESET (page 12)
Resets the adjustments.
x Displaying the current input signal
When you press the button to display the menu, information
on the current input signal is displayed. If the current input signal
matches one of the monitor's factory preset modes, the resolution
and vertical frequencies are displayed. (See page 18 for a list of
factory preset modes.) If the current input signal does not match
one of the factory presets, the horizontal and vertical frequencies
are displayed.
EX I T
45
1 2 8 0 x 1 0 2 4 / 8 5 H z
the resolution/horizontal
frequencies of the current input
signal
Adjusting the brightness and
OPT ON I
contrast (BRIGHT/CONTRAST)
CONTROL
LOCK
ON
These settings are stored in memory for all signals.
OFF
1 2 8 0 x 1 0 2 4 / 8 5 H z
1
2
RESET
1
2
CURRENT
MODE
If you are using the sRGB mode
OK
CANCEL
If you selected the sRGB mode in the COLOR MODE (
COLOR (
1 2 8 0 x 1 0 2 4 / 8 5 H z
appears on the screen.
You cannot adjust the contrast (6) nor brightness (
screen. If you want to adjust them, select a mode other than sRGB
in the COLOR MODE (
For more information about using the sRGB mode, see
"Adjusting the color of the picture (COLOR)" on page 10.
the vertical
frequencies of
the current
input signal
7
Press the M button to call up the BRIGHTNESS
adjustment window, or press the 6 m button to call
up the CONTRAST adjustment window.
Press the </, buttons to adjust the brightness
( ) or contrast (6).
) menu, the following BRIGHT/CONTRAST menu
BR GHT I / CONTRAST
s RGB
:
1 2 8 0 x 1 0 2 4 / 8 5 H z
) of the COLOR (
) of the
/
) on this
) menu.
US