Omega Crime Guard 810i6 Operation Manual page 6

- IMPORTANT -
This system is the most versatile vehicle security system made. It
has many programmable features and includes built-in program-
mable relays, which can offer more features and operations which
are described in the basic system instructions.
To a large degree, these extra features and operations are config-
ured at the installation of the system. Please read the sections of
this manual which explain programmable features, and please
consult your installer for specifics on how your system is config-
ured, and for installation options which may have used, or can be
added to system after installation.
EXAMPLE- the system can sound the vehicle's horn in place of or in
addition to the electronic siren which is included with it. But the
operations are described with the siren only.
The CG-810i6 is capable of having the optional Omega "Echo"
added to it, which would add 2-way control and confirmation
paging. In this case, the CG-810i6's operations would be identical
to that of the CG-830i6. If the Echo is added, the instructions
included with the Echo kit would then supplement this instruction
booklet.
Page - 6
• The first setting (programmed by the "arm/lock" button) has the system
produce both the lock and unlock outputs as .8 second in duration. This is the
most common form of output needed, which interfaces most vehicles.
• The second setting (programmed by the "disarm/unlock" button) changes the
lock and unlock outputs to be a longer 3 second pulse output. This is for certain
vehicles which require a longer output pulse from the system's control unit;
typically cars having vacuum pump systems, although the longer setting is also
more suitable in some newer vehicles.
• Some newer vehicles require a double pulse output to remotely unlock the doors
and/or to disarm a factory-equipped security system, which is what the Double
Pulse Unlock setting provides (it is programmed by the "II" button ). The lock
output pulse, in this setting, is .8 second.
• The Total Closure Lock Output (programmed by the "III" button) may be used
with vehicles which are originally equipped with the total-closure feature.
Typically, a total closure feature is when locking the vehicle's doors if the key
in the door is held to "lock" for a period of time the vehicle will close all
windows and the sunroof, in addition to locking the doors.
Selecting this feature setting changes the system's door lock output pulse from
a .8 second to as long as a 28 second duration output. The unlock output is 3
seconds in this setting.
Note: When this feature is turned on, during the 28 second period after arm-
ing the system, the lock output can be stopped on demand by pressing the
"arm/lock" or "disarm/unlock" button. Only the output will stop- pressing
either button again will normally operate the system, and at any time after the
28 second lock output period ends.
If either of the programmable relays are set for lock or unlock operation (the next
two Installer Programmable Features), the settings if this feature will operate the
programmable relays accordingly, in addition to the primary system doorlocking
outputs.
Feature #2 Light Relay Functions
Factory Default Setting Dome Light Output
( press "arm/lock" button to program
Options:
press "disarm/unlock" button to program
Door Lock (
Ignition Output ( press "II" button to program
press "III" button to program
Accessory Output (
The system has two built-in relays, which can be programmed to perform several
different functions. The primary function of this relay, is to operate the vehicle's
dome, or interior lighting as part of the system's operations. Optionally, if desired
or needed, this relay can be programmed to be a door lock relay, or as medium-capacity
ignition or accessory outputs, if needed for remote starting use.
)
)
)
Page - 35
)