Paper Installation; Printer Connection - Oki OKIPAGE 10e Setup Manual

Paper installation

Note:
Please refer to the user guide for the types of pa-
per to use in this printer.
1. Remove the paper tray from the bottom of the
printer and place plain paper in the tray, keeping
the level of the paper in the tray below the guide
marks (1).
2. Adjust the rear paper support (2) to the size of
paper you are using by lifting up and sliding for-
wards or backwards as necessary.
3. Adjust the paper guides (3).
4. Replace the tray in the printer. The paper level
indicator (4) provides a visual indication of how
much paper is left in the tray.
Setup Guide

Printer connection

CAUTION:
Make sure the printer is disconnected from the power sup-
ply and the computer is turned off.
1. Connect the interface cable into the parallel
socket (1) on the printer.
Note:
The parallel cable should support bi-directional
communication and must be shielded.
2. Connect the power cable into the power socket
(2) on the printer, then into a grounded outlet.
3. Switch the printer on using the main power
switch (3).
English
9