Using Ready Set; Exhaust High / Low / Off; Surface Light/On / Off - Frigidaire 316495088 Use & Care Manual

Table of Contents

Advertisement

Using Ready Set
I ............
2
.............
.............
3
Microwave heating or cooking may be quickly set at 100%
power level for 1,2 or 3 minutes. Use the number keys 1,2
or 3 to choose the desired minutes of cook time (this option
will only work using the 1,2 or 3 numeric pads):
Example: to quickly heat for 2 minutes at 100% power:
Touch number pads 1,2 or 3 for desired
minutes of cook time.
Note: the Ready Set function cannot be set when using the
Defrost (by weight) feature.
Exhaust High / Low / Off
The exhaust ventilation moves steam and other cooking
vapors from the cooking surface of the range below the
microwave oven.
To operate the exhaust vent, Touch the
Exhaust
High/Low/Off
pad once for the
highest speed setting. Touch the pad again to
choose the Low speed setting and a 3rd time
to turn the exhaust ventilation off.
exhaust
td.[o- off
Note: If the temperature gets too hot around the microwave
oven, the fan in the exhaust vent hood will automatically turn
on at the LOW setting to cool the oven. The will
automatically turn off when the internal parts are cool. When
this occurs, the vent cannot be turned off.
Surface Light/On
/ Off
Touch the Surface
Light/On/Off
pad
once for a cooking surface light. Press the
pad again to turn the light off.
light
on.off
Setting Defrost by Weight
Example: to defrost lib. of food with the default power
level an
cookt! me determined automatically:
1. Press Defrost
Weight
pad once.
defrost ........
0.0 will appear in the display,
wo_Jht
,
Use the numeric pads to input weight
of food to defrost in pounds (10 = 1lb.)
You may enter any weight from 0.1 to
6.01bs.
3. PressSTART/+30sec.
pad.
0
start
When defrosting has finished you will hear beeps.
Note: The weight amount must be a valid entry for this
feature to start. A valid weight entry is 0.1 to 6.0 pounds.
Setting Defrost by Time
Example: to defrost food with the default 30% power level
for 5 minutes:
1. Press Defrost
Time
pad once.
defrost
ti_e
0:00 will appear in the display.
,
Use the number pads to enter desired
defrost time (defrost time may be set
up to 99 minutes and 99 seconds).
5
0
0
3. Press START/+30sec.
pad.
start
When heating has finished you will hear beeps.
Note: Power levels cannot be changed for both defrost (by
weight) or defrost (by time) because the defrost performance
will be adversely affected.
Special notes for defrosting by time
After pressing START
key, the display will
count down remaining defrost time. The oven will beep
twice during the defrost cycle. At this time open the door
and turn the food if needed and remove any portions that
have already thawed. Touch the START
key to
resume the defrost cycle.
When heating has finished you will hear beeps.

Advertisement

Table of Contents
loading

Table of Contents