Download  Print this page

Surface Light Replacement - Frigidaire 316495088 Use & Care Manual

Hide thumbs

Advertisement

Table of Contents
Disconnect the power cord before cleaning or
leave the door open to deactivate
the oven during cleaning.
Cleaning
the exhaust
filters
The oven ventilation exhaust filters should be removed and
cleaned often; generally at least once every month.
Surface light replacement
To avoid risk of personal injury or property damage, do
not operate oven hood without filters properly in place.
Surface lights
Q
Front
Ventilation
filters
1. To remove the exhaust ventilation filters, slide the filter to
the rear. Then pull filter downward and push to the other
side. The filter will drop out. Repeat for the 2nd filter.
To avoid risk of personal injury or property damage, wear
gloves when replacing the light bulbs.
,
,
Unplug the microwave oven or turn off power at the main
circuit breaker.
Remove the bulb cover mounting screws at both light
positions under the microwave.
,
4.
5.
Replace bulb with 30 watt appliance bulb.
Re-install bulb cover and mounting screw.
Plug the microwave back into the power supply or turn
the power back on at the main circuit breaker.
2. Soak the ventilation filters in hot water using a mild
detergent. Rinse well and shake to dry or wash in
a dishwasher. Do not use ammonia.
The aluminum
on the filter will corrode
and darken.
3. To reinstall the exhaust ventilation filter, slide it into the
side slot, then push up and toward oven to lock.
Reinstall the 2nd filter using the same procedure.

Advertisement

Table of Contents
loading

  Related Manuals for Frigidaire 316495088