Connecting The Power Supply - Cisco 805 Hardware Installation Manual

Connecting the Power Supply

Follow the steps in Figure 2-7 to connect the power supply.
Warning
Warning
(overcurrent) protection. Ensure that a fuse or circuit breaker no larger than
120 VAC, 15A U.S. (240 VAC, 16A international) is used on the phase conductors
(all current-carrying conductors).
Warning
connected to earth ground during normal use.
Figure 2-6
2. Connect power
The device is designed to work with TN power systems.
This product relies on the building's installation for short-circuit
This equipment is intended to be grounded. Ensure that the host is
Connecting the Power Supply
1. Press power switch
to STANDBY (
HU B
E TH E R
N E T
NO HU
C is c o 8
B
LI NK
C O N S O
0 5
LE
10 B A S
E T
3
supply cable.
Desktop power supply
3. Connect power cord
to power supply.
Cisco 805 router
).
SE R IA L
Connecting the Power Supply
5. Press power switch
to ON ( ).
4. Connect other end
of power cord to
electrical outlet.
Installing the Cisco 805 Router 2-13