Accessing The System Bios - Cisco UCS C220 Installation And Service Manual

System BIOS and CIMC Firmware

Accessing the System BIOS

To change the BIOS settings for your server, follow these steps. Detailed instructions are also printed on
the BIOS screens.
Enter the BIOS setup utility by pressing the F2 key when prompted during bootup.
Step 1
Note
Use the arrow keys to select the BIOS menu page.
Step 2
Highlight the field to be modified by using the arrow keys.
Step 3
Step 4 Press Enter to select the field that you want to change, and then modify the value in the field.
Step 5 Press the right arrow key until the Exit menu screen is displayed.
Step 6 Follow the instructions on the Exit menu screen to save your changes and exit the setup utility (or Press
F10). You can exit without saving changes by pressing Esc.
Cisco UCS C220 Server Installation and Service Guide
2-14
The version and build of the current BIOS are displayed on the Main page of the utility.
Chapter 2 Installing the Server
OL-25760-01