Kenmore 106.5117 Use & Care Manual page 6

Gather t herequired tools andparts andreadallinstructions before starting i nstallation. Save these instructions forfuture reference.
NOTE: Before moving y ourproduct intoyourhome, measure thedoorway o fyourhome tosee whether youneed to remove the
refrigerator andfreezer doors. If doorremoval isnecessary, see theinstructions below.
IMPORTANT: Before y oubegin, turn therefrigerator control OFF orturn cooling off.Unplug r efrigerator ordisconnect power.
Remove food, t heicestorage b in(onsome models), andanyadjustable doororutilitybins fromdoors.
TOOLS NEEDED:
Bubble level, Phillips screwdriver, _6" hex key, 1/4" hex-head socket wrench, 1/4"and %d' open-ended wrenches or adjustable wrench,
internal star drive or 3/8" hex-head socket wrench
Electrical Shock Hazard
Disconnect power before removing doors.
Failure to do so can result in death or electrical shock.
A B C D E F
A. P-clamp D. Wiring Clip
B. Routing E. Grommets
Plate F. Wiring
C. Electrical Plugs
Housing
Water Dispenser
Tubing Connection
(Style 1)
A
A
A. Face of Fitting
Top Left Hinge
A. Do Not Remove Screws.
Water Dispenser Tubing
Connection (Style 2)
Door Removal
Top Right Hinge
A. Do Not Remove Screws.
Bottom Hinges
(Left and Right)
Leveling
A. Bottom Hinge
B. Leveler Bracket
C. Leveling Foot
Door Alignment
(Bottom Right Hinge)
A___IF Raise
A. Alignment Screw
6