Setting For Audible Or Silent Keypad Operation (Some Models); Setting The Timer; Changing Between Continuous Bake Or 12-Hour; Energy Saving Features - Electrolux Electric Range Use & Care Manual

Setting for audible or silent keypad
operation (:some models)
Normally a beep will sound each time a keypad is pressed.
If desired, the control may be set for silent keypad
operation.
To blockthe controls from sounding when any keypad is
pressed in the future, press and hold start time keypad for
6 seconds. The control will beep once then release the
keypad.
To return the tones, press and hold start time again for 6
seconds until the control beeps once.
Setting the timer
To set the timer:
1. Press timer on=off.
2. Press the A keypad to increase the time in one minute
increments. Press and hold the A keypad to increase
the time in 10 minute increments. The timer can be set
for any amount of time from 1 minute to 11 hours and
59 minutes.
Note: If the V keypad is pressed first, the timer will
advance to 11 hours and 59 minutes.
3. When the set time has run out, the timer will beep 3
times and will continue to beep 3 times every 60
seconds until timer on=off is pressed.
To change the timer when it is active:
When the timer is active in the display, press and hold the
A or V keypad to increase or decrease the time
remaining.
To cancel the timer before the set time has run out
Press timer on=off once .
• The indicator light located above the timer on-off
keypad will glow while the minute timer is active.
The timer will display hours and minutes until 1 hour
remains on the timer. Once less than 1 hour remains,
the display will count down in minutes and seconds.
Once the timer has less than 1 minute remaining only
seconds will display.
The timer will not start or stop the cooking process.
The timer serves as an extra timer in the kitchen that
will beep when the set time has run out. The timer may
be used alone or while using any of the other oven
features.
• If another feature is active when the timer is active,
the timer will show in the display. To view information
about other active features, press the keypad for that
feature.
Changing between continuous bake
setting or 12-Hour Energy Saving feature
The oven control has a built=in 12=Hour Energy Saving
feature that will shut off the oven if the oven is left on for
more than 12 hours. The oven control may be programmed
to override this feature for continuous baking.
Changing to continuous bake setting:
1. Press and hold timer on=off keypad down for 6
seconds until a tone sounds. ,,m m hr" will appear in
display for continuous cooking. The current time of day
will return to the display.
.
To cancel the continuous bake setting, press timer
on-off keypad and hold for 6 seconds until a tone
sounds. "::[2hr" will appear in display indicating that the
control has returned to the 12-Hour Energy Saving
feature.
This feature will not change how the cooktop controls
operate.