Canon LEGRIA HFR16 Instruction Manual page 23

NOTES
• About the LCD screen: The screen is produced using extremely high-pre-
cision manufacturing techniques, with more than 99.99% of the pixels
operating to specification. Less than 0.01% of the pixels may occasion-
ally misfire or appear as black, red, blue or green dots. This has no
effect on the recorded image and does not constitute a malfunction.
LCD Backlight
When recording in bright places it may be difficult to use the LCD
screen. Turn on the LCD backlight to make it brighter.
With the camcorder on, hold
2 seconds.
• Repeat this action to switch the LCD backlight between off (normal) and
on (bright).
• If [LCD Screen Dimmer] is set to [
more than 2 seconds will turn off the screen dimmer and return the LCD
screen to its previous brightness setting.
NOTES
• The LCD backlight does not affect the brightness of the recordings.
• Using the bright setting will shorten the effective usage time of the bat-
tery pack.
• You can further adjust the brightness of the LCD screen with the
[LCD Brightness] setting, or dim it with the
mer] setting to use in places where the light from the LCD screen can
be a nuisance.
DISP.
pressed down for more than
On], pressing DISP.
[LCD Screen Dim-
Preparations
for
23