Canon LEGRIA HFR16 Instruction Manual page 141

Cannot move scenes in the playlist.
- The memory is full. Delete some recordings (
free some space.
Cannot delete a scene.
- You may not be able to delete scenes recorded or edited using another device.
Deleting scenes takes longer than usual.
- When the memory contains a large number of scenes, some operations may take longer than
usual. Save your recordings (
Cannot delete a photo.
- The photo is protected. Remove the protection (
Cannot capture a video snapshot scene from a movie.
- You cannot capture video snapshot scenes from scenes recorded or edited using another
device.
- The memory is full. Delete some recordings (
free some space.
When playing back scenes/slideshow with background music, the music track is not played
back correctly.
- This can occur when you transfer the music files to the memory after repeatedly recording
and deleting scenes (fragmented memory). Save your recordings (
memory ( 35). Then, transfer the music files first and only then write the video files back
to the memory.
- Music tracks will not play back correctly if the connection was interrupted while transferring
the music files. Delete the music tracks and transfer the music files again.
- The transfer rate of the memory card used is too slow. Use a recommended memory card
( 32).
Playback is not linked with music from a connected external audio player.
- If the player's volume is low, playback may not link to the music. Increase the player's vol-
ume.
Cannot divide scenes
- You cannot divide scenes recorded or edited using another device.
- The memory is full. Delete some recordings (
free some space.
/ /
- You may not be able to copy scenes/photos recorded or edited using another device.
Cannot mark individual scenes/photos in the index screen with a checkmark
- You cannot select more than 100 scenes/photos individually. Reduce the number of selected
scenes/photos.
104) and initialize the memory (
Cannot copy scenes/photos
50, 83) or initialize the memory (
89).
50, 83) or initialize the memory (
50, 83) or initialize the memory (
Additional Information
35) to
35).
35) to
104) and initialize the
35) to
.
141