Canon LEGRIA HFR16 Instruction Manual page 151

This photo could not be deleted
- Protected photos (
/ /
recording.
- Save the movies on the memory card (
( 35).
This photo cannot be displayed
- You may not be able to display photos taken with other devices or image files created or
edited on a computer.
- The playlist can contain a maximum of 999 scenes.
This scene was recorded using another device and cannot be added to the playlist.
- Scenes that were not recorded with this camcorder cannot be added to the playlist.
/ /
- Scenes that were not recorded with this camcorder cannot be copied to the memory card.
To use this function, switch out of
- You pressed a button that cannot be used in
to flexible recording mode.
Too many photos. Disconnect the USB cable.
- Disconnect the USB cable. Try using a memory card reader or decrease the number of photos
on the memory card to fewer than 2,500 photos (for Windows and printers) or 1,000 photos
(for Mac OS). Disconnect the USB cable, and restore the connection after a short while.
- If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and
restore the connection after a short while.
/ /
- The playlist cannot be converted when its total playback time exceeds 2 hours and 30 min-
utes. Reduce the number of scenes in the playlist.
Unable to recognize the data
- You transferred data to the camcorder recorded in a different television system (NTSC).
Unable to recover data
- Could not recover a corrupted file. Save your recordings (
using the [Complete Initialization] option (
Messages Related to the Optional DW-100 DVD Burner
If an error message appears while the camcorder is connected to the
optional DW-100 DVD Burner, refer to the following section and also to
the instruction manual of the DVD burner.
) cannot be deleted. Remove the protection (
This memory card contains scenes. Delete all scenes to use relay
This scene was recorded using another device and cannot be copied.
mode
Total play time is too long
115) and initialize the memory card
mode. Press
104) and initialize the memory
35).
Additional Information
89).
to set the camcorder
151