Canon LEGRIA HFR16 Instruction Manual page 147

Cannot play back
- There is a problem with the memory. If this message appears often without apparent reason,
contact a Canon Service Center.
/ /
- There is a problem with the built-in memory. Save your recordings (
built-in memory using the [Complete Initialization] option (
contact a Canon Service Center.
Cannot play back Check the memory card
- There is a problem with the memory card. Save your recordings (
memory card using the [Complete Initialization] option (
different memory card.
/ /
camcorder
- The camcorder's built-in memory was initialized using a computer. Initialize the built-in mem-
ory with this camcorder (
Cannot play the movies on this memory card
- Movies cannot be played back from a 64 MB or smaller memory card. Use a recommended
memory card (
Cannot play the movies on this memory card Initialize only using the camcorder
- The memory card in the camcorder was initialized using a computer. Initialize the memory
card with this camcorder (
Cannot record
- You cannot capture video snapshot scenes from scenes recorded or edited using another
device.
- There is a problem with the memory. If this message appears often without apparent reason,
contact a Canon Service Center.
/ /
- There is a problem with the built-in memory. Save your recordings (
built-in memory using the [Complete Initialization] option (
contact a Canon Service Center.
Cannot record Check the memory card
- There is a problem with the memory card. Save your recordings (
memory card using the [Complete Initialization] option (
different memory card.
/ /
camcorder
- The camcorder's built-in memory was initialized using a computer. Initialize the built-in mem-
ory with this camcorder (
Cannot play back Cannot access the built-in memory
Cannot play the movies in the built-in memory Initialize only using the
35).
32).
35).
Cannot record Cannot access the built-in memory
Cannot record movies in the built-in memory Initialize only using the
35).
104) and initialize the
35). If the problem persists,
104) and initialize the
35). If the problem persists, use a
104) and initialize the
35). If the problem persists,
104) and initialize the
35). If the problem persists, use a
Additional Information
147