Cabinet Installation - HAMPTON BAY HBLG1800H Owner's Manual

Cabinet Installadon
1. Open the window, Mark a line on the center
of the window stool between the side
window stop moldings.
Loosely attach the sill bracket to the support
bracket using the carriage bolt and the lock
nut.
Sill
Bracket
Carriage
Bo_t
(M-Screw)
nut
2. A_ach the sill bracket to the window s,ill
using the screws (Type B).
Carefully place the cabinet on the window
stool and align the center mark on the
bottom front with the center line marked
window stool.
Carnage
and Jocknut
Machine s crew(Ty_D)
andlocknut
O_er edge
window
sill
B)
"SJl[bracket
3. Using the M-screw and the lock nut, attach
the sup_rt bracket to the cabinet track hole.
Use the first track hole after the sill bracket
on the outer edge of the window sill. Tighten
the carriage bolt and the lock nut. Be sure
the cabinet slants outward.
CAUTION: Do not drill a hole in the
bottom pan. The unit is designed to
operate with approximately 112" of water in
bottom pan.
4, Pull the bottom window sash down behind
the Top retainer bar until they meet.
:1. Do not pull the window sash
down so tightly that the
movement of Frame curtain is
restricted. Attach the cabinet to
the win_w stool by driving the
screws (Type B) through the
cabinet into window st_l.
2. The cabinet should be installed
with a very slight tilt downward
toward the outside.
retainer
bar
Window sash
Frame cu_ain
Foam-PE
Window stool
Frontangle
retainer bar
track
Front Angle
Screw(Ty_ B)